Whether you’re building a garage from scratch, or you’re simply installing a 2 post lift, there are a few things you should know before you start positioning your car on the lift.
Creating at least two feet of space between posts, hoisted vehicles, and the sidewalls
Creating at least two feet of space between posts, hoisted vehicles, and the sidewalls of a two post lift is no small feat. The auto life requires adequate space to maneuver around the vehicle being hoisted, as well as a place for technicians to work. Ideally, you’ll want to have at least three feet of space in front of the columns, four feet of space between the columns and the hoisted vehicle, and at least six feet of clearance under the car.
There are many types of auto lifts, including freestanding models and overhead configurations. You’ll want to take a good look at the specification sheet to determine the proper lift for your garage. You’ll also want to take into account any existing equipment you might have, including workbenches and storage cabinets.
Mechanic Superstore – Heavy Duty Car LIfts to determine how much space you have is to consider the size of the vehicle you are hoisting. For example, if you’re looking to lift a pickup truck, you’ll want at least one foot of space on each side.
Adapters must be placed at the manufacturer’s recommended lifting points
Adapters are an important part of a car lift. They provide grip for a car and help to position it on a 2 post lift. However, using the wrong adapters can lead to improper lifting and cause your car to fall off the lift. If you are not sure what adapters you need, consult your car lift manual.
Some lifts require height adapters to get your car up to the height you need. If you have a light truck, sport utility vehicle, or van, you may need an adapter to get the right height. Some lifts come with a height adapter, while others are sold separately.
To find the adapter for your vehicle, you’ll need to look for a vehicle’s factory recommended lifting point. These are typically located on the underside of the chassis. Some manufacturers use decals and permanent markings to point you in the right direction.
Using Mechanic Superstore: 4 post car lifts guide lift to position your car is not for the faint of heart. It may cause your vehicle to tip over, break suspension components, and bend your windshield or steering wheel.
Choosing the right type of lift for your garage
Choosing the right type of lift for your garage is crucial. There are several factors to consider including space, clearance and foundation requirements. The right lift can increase productivity and boost your bottom line.
Choosing the right lift is also a way to increase safety. You must make sure your vehicle lift meets the safety standard ANSI/ALI ALCTV. You will also need to check the local building code regulations to ensure your garage meets the code.
A symmetric lift places the weight of your vehicle between two posts. This style is best suited for larger trucks. However, most garage owners prefer asymmetric lifts for passenger cars. Asymmetric lifts place the car further back. This style also allows for wider doors when entering the vehicle.
Two post lifts are the most common type of automotive lift. They are easy to operate and take up less space. They are also ideal for smaller shops. However, they may not be the best option for larger vehicles.
Safety tips when operating a two-post lift
Using a two-post lift can be dangerous. It requires skill and training to safely operate a vehicle lift. Failure to follow these instructions can lead to serious injury or death.
When you have positioned your vehicle correctly, lower the lift as slowly as possible. Check the surface for any obstructions. If necessary, use a tall jack stand to assist you with load changes on the lift.
If a few of their recent reports plan to use your vehicle on an overhead platform, wear safety glasses, goggles, or a hard hat. Make sure to check your lift’s user manual to determine the proper procedure.
If the vehicle is not secured properly, it could roll or fall. Check for any overhead obstructions and make sure to clear them.
The lift should have a locking mechanism that secures the vehicle during lift. The lock should be disengaged when lowering the vehicle. The weight of the vehicle must be evenly distributed throughout the lift.
Depending on your purpose for using the lift, you may want to increase the height or lower the lift. Always use the manual’s rated load capacity, which is based on the weight of your vehicle.
1419 N Midland Blvd, Nampa, ID 83651
Phone: (866) 774-7743